Click anywhere to close.

Error: It was not possible to display the image
Contact Info
Weber Group Weber Group MGS Logo MGS Logo

You are here: Home > Print and Apply > Print Engines > Avery DPM/PEM

Avery DPM/PEM

You can equip your print-apply system with a printer module Avery® DPM or PEM. On our labeling application systems, you just need to tight a few screws (standard drillings), connect the cable on the applicator port, select one of the application modes in the printer's menu and it's done.

Main Features

Avery DPM / PEM

Printers from manufacturer Avery® that have the particularity of having near-edge printheads to obtain an even more detailed print (they need special ribbons). The printers also receive high praise by the fact of allowing many adjustments and tunes via printer's menu. The printers DPM and PEM have the following features:

  • Resolution: 300dpi
  • Print Width: 106mm (4" models), 127mm (5" models) or 160mm (6" models)
  • Memory: 64MB RAM / 4MB ROM
  • Processor: 32-Bit AMD MIPS, 400MHz
  • Max Roll Width: 136mm (4" and 5" models) or 190mm (6" models)
  • Max Print Speed: 300mm/s (6" models) or 400mm/s (4" and 5" models)
  • Real-Time Clock (RTC)
  • Rotatable display
  • Applicator Interface Port
Contact Us >>

Model: DPM

Avery DPM

You can choose a 4, 5 or 6 inches model, depending on your label's width, always available on LH and RH (left-/right-hand) versions with resolutions of 300dpi and RS232 port, parallel port, USB and Ethernet.

Contact Us >>

Model: PEM

Avery PEM

They are completely similar to the DPM models, also available with widths of 4, 5 and 6 inches, and LH or RH versions. The difference lies in the fact that this is one of the fewest printer modules that is designed to be used inline. This means that, contrasting with the DPM (Dispensing Printer Module) model which will peel off the labels from the liner, the PEM (Print Engine Module) will not peel them off a pull the liner back. Like this, the system can be used together inline with a second printer or with an applicator that is made in way that it will peel off the labels by itself. As you can see in the image, combining two PEM models inline, we can print with two different colors, for example, to print GHS (Globally Harmonized System) labels. In the image, two PEM systems were used because it is intended to obtain a rewinded printed roll, but if it was for print-application, the second module could be a DPM to peel off the labels and deliver them to the tamp pad.

Contact Us >>

Popular Options

Options

Do not forget to check the extras that you would like to install. The most popular options for these printers are (some options can't be installed at the same time and are only available for certain models):

  • Compact Flash 128MB NN
  • Peeler Bar Extension
  • RFID (UHF EPC Gen Class 1/2 ISO 18000-6C)
  • And more...
Contact Us >>

Documentation

Avery DPM/PEM Documentation

Photos

Photo 01 Photo 02 Photo 03 Photo 04 Photo 05
The specifications shown on this page may vary depending on the versions/models of the systems and may contain errors and/or may be subject to future changes. Double check these specs with the ones available on the respective brochures/technical sheets and always mention the critical requirements of your particular application when ordering/inquiring for prices.

^ Return to the page top ^