Click anywhere to close.

Error: It was not possible to display the image
Contact Info
Weber Group Weber Group MGS Logo MGS Logo

You are here: Home > Print and Apply > Thermal-Transfer Printers > Zebra G Series

Zebra G Series

The cheapest solution to print your labels. Because these printers can only accommodate small label rolls and use small 74m ribbon rolls (on thermal-transfer models), they were not designed for long label prints, but for sporadic prints instead. They are compact, so they can fit anywhere.

Main Features

Zebra G Series

There are various models to answer the requirements of each customer. Main features:

  • Resolutions: 203dpi (300dpi on GX430)
  • Max Printing Width: 104mm
  • Max Roll Width: 108mm
  • Memory: 8MB SDRAM / 4MB Flash
  • Max Print Speed: 102mm/s (GX430t), 127mm/s (GK420d and GK420t) or 152mm/s (GX420d and GX420t)
  • Transmissive and reflective label sensors (fixed)
  • USB, serial RS232 and parallel ports as standard
Contact Us >>

Model: GK420d and GK420t

Zebra GK

These are the cheapest printers from Zebra®. You can choose the GK420d which only allows the direct-thermal method for thermal-sensitive paper or the more advanced GK420t, which is also equipped with a ribbon mechanism, in case you need to print using the thermal-transfer method.

Contact Us >>

Model: GX420d, GX420t and GX430

Zebra GX

Enhanced versions of the GK printers. They reach higher print speeds and allow the installation of more options, such as the wireless network with a LCD screen, Bluetooth®, memory expansion with real-time clock and movable sensors. Just like it happened on the GK models, the GX420t model allows the usage of thermal-transfer ribbons, whereas the GX420d does not. Furthermore, the GX430 model is the only one that has a 300dpi printhead and comes with the ribbon system as standard.

Contact Us >>

Popular Options

Options

Do not forget to check the extras that you would like to install. The most popular options for these printers are (some options can't be installed at the same time and are only available for certain models):

  • Ribbon unit for Thermal-Transfer
  • Cutter
  • Ethernet Board
  • Wireless Network (Wi-Fi) with LCD display (only on GX)
  • Bluetooth® (only on GX)
  • 64MB Flash Memory Expansion with RTC (only on GX)
  • Movable sensors (only on GX)
  • And more...
Contact Us >>

Documentation

Zebra G Series Documentation

Photos

Photo 01 Photo 02 Photo 03 Photo 04 Photo 05 Photo 06 Photo 07 Photo 08 Photo 09 Photo 10 Photo 11 Photo 12 Photo 13 Photo 14
The specifications shown on this page may vary depending on the versions/models of the systems and may contain errors and/or may be subject to future changes. Double check these specs with the ones available on the respective brochures/technical sheets and always mention the critical requirements of your particular application when ordering/inquiring for prices.

^ Return to the page top ^