Click anywhere to close.

Error: It was not possible to display the image
Contact Info
Weber Group Weber Group MGS Logo MGS Logo

You are here: Home > Print and Apply > Thermal-Transfer Printers > Datamax I-Class

Datamax I-Class

Semi-industrial models that stand between the M-Class and H-Class. When compared to the M-Class, these printers are sturdier, faster, have more memory and have a 600dpi model available.

Main Features

Datamax I-Class

With a great quality/price relation, the models from the I class are the most popular ones from Datamax®. The I-Class printers have the following features:

  • Resolution: 203dpi, 300dpi or 600dpi
  • Memory: 32MB SDRAM / 64MB Flash
  • Print Width: approx. 105mm
  • Max Roll Width: 118.1mm
  • Max Print Speed: 152mm/s (I-4606), 254mm/s (I-4310) or 304mm/s (I-4212)
  • Serial RS232, Parallel and USB 2.0 Ports
Contact Us >>

I-Class: Several Models

Several I-Class Models

There are many models, all them available in LH and RH (left-/right-hand) versions. The first digit on the model indicates its width (4 or 6 inches). The second digit informs about the print resolution (2-203dpi, 3-300dpi, 6-600dpi) and, finally, the last two numbers indicate the maximum print speed (for example, 08 means 8ips, i.e., 203mm/s). The models we have to your disposal are:

  • I-4212e 203dpi (104mm)
  • I-4310e 300dpi (105mm)
  • I-4606e 600dpi (105mm)
Contact Us >>

Popular Options


Do not forget to check the extras that you would like to install. The most popular options for these printers are (some options can't be installed at the same time and are only available for certain models):

  • Thermal-Transfer (ribbon mechanism)
  • Cutter
  • Rewinder
  • Rewinder with Peel-Off System
  • Ethernet Board
  • Wireless Network (802.11 a/b/g)
  • And more...
Contact Us >>


Datamax I-Class Documentation


Photo 01
The specifications shown on this page may vary depending on the versions/models of the systems and may contain errors and/or may be subject to future changes. Double check these specs with the ones available on the respective brochures/technical sheets and always mention the critical requirements of your particular application when ordering/inquiring for prices.

^ Return to the page top ^