Click anywhere to close.

Error: It was not possible to display the image
Contact Info
Weber Group Weber Group MGS Logo MGS Logo

You are here: Home > Print and Apply > Print Engines > Datamax A-Class

Datamax A-Class

You can equip your print-apply system with any of the printer modules from Datamax® A-Class. On our labeling application systems, you just need to tight a few screws (standard drillings), connect the cable on the applicator port, select one of the application modes in the printer's menu and it's done.

Main Features

Datamax A-Class

Printers from the manufacturer Datamax®, designed to be used within a print-apply system. The printers A-Class have the following features:

  • Resolution: 203dpi, 300dpi, 406dpi or 600dpi
  • Print Width: approx. 104mm (models A-4xxx) or approx. 162mm (models A-6xxx)
  • Memory: 16MB DRAM / 8MB Flash
  • Max Roll Width: 118mm (models A-4xxx) or 170mm (models A-6xxx)
  • Max Print Speed: 152mm/s (models A-xx06), 203mm/s (models A-xx08), 254mm/s (models A-xx10) or 304mm/s (models A-xx12)
  • Real-Time Clock (RTC)
  • Applicator Interface Port
Contact Us >>

A-Class: Several Models

Several A-Class Models

There are many models, all them available in LH and RH (left-/right-hand) versions. The first digit on the model indicates its width (4 or 6 inches). The second digit informs about the print resolution (2-203dpi, 3-300dpi, 4-406dpi, 6-600dpi) and, finally, the last two numbers indicate the maximum print speed (for example, 08 means 8ips, i.e., 203mm/s). The models we have to your disposal are:

  • A-4212-LH/RH Mark II 203dpi (104mm) with Serial RS232, Parallel, Ethernet and USB ports
  • A-4310-LH/RH Mark II 300dpi (105mm) with Serial RS232, Parallel, Ethernet and USB ports
  • A-4408-LH/RH Mark II 406dpi (104mm) with Serial RS232, Parallel, Ethernet and USB ports
  • A-4606-LH/RH Mark II 600dpi (105mm) with Serial RS232, Parallel, Ethernet and USB ports
  • A-6212-LH/RH Mark II 203dpi (168mm) with Serial RS232, Parallel, Ethernet and USB ports
  • A-6310-LH/RH Mark II 300dpi (162mm) with Serial RS232, Parallel, Ethernet and USB ports
Contact Us >>

Popular Options

Options

Do not forget to check the extras that you would like to install. The most popular options for these printers are (some options can't be installed at the same time and are only available for certain models):

  • Thermal-Transfer (ribbon mechanism)
  • Secondary remote display with cable (for when the access to the printer is difficult)
  • Pinch Rollers (for larger rolls)
  • Wireless Network (Wi-Fi 802.11 b/g)
  • RFID (UHF EPC Class 1/Gen 2)
  • USB Port (PEN)
  • And more...
Contact Us >>

Documentation

Datamax A-Class Documentation

Photos

Photo 01 Photo 02 Photo 03
The specifications shown on this page may vary depending on the versions/models of the systems and may contain errors and/or may be subject to future changes. Double check these specs with the ones available on the respective brochures/technical sheets and always mention the critical requirements of your particular application when ordering/inquiring for prices.

^ Return to the page top ^